The 430-JTAG Adapter kit adapts the 14 pin cable output of the MSP-FET430P120, MSP-FET430P140, MSP-FET430P410 and MSP-FET430P440 Flash Emulation Tools (FET) and the 14 pin cable output of the MSP-PRGS430 Serial Programmer to a 9 pin Single Inline Pin (SIP) connector which makes it suitable for solderless breadboarding and wire-wrap prototyping.

The adapter -- in conjuction with a Texas Instruments' MSP430 FET or Serial Programmer -- can be used to program all the microcontroller Flash devices in the Texas Instruments' MSP430 family.

The kit contains:

• one 430-JTAG Adapter board
• one 9 pin Single Inline Pin (SIP) connector {0.025" [0.635mm] square pins and 0.100" [2.54mm] pin spacing}
• one 14 pin Low Profile Box Header {2 x 7 configuration with 0.025" [0.635mm] square pins and 0.100" [2.54mm] pin spacing}

The 430-JTAG Adapter board dimensions are (refer to the figure below):

Height -- Item A: 0.901 [22.89mm]

Width -- Item B: 1.102" [27.99mm]

Center to Center Hole Spacing -- Item C: 0.100" [2.54mm]

Adapter Board Thickness -- 0.062" [1.57mm]

Usable Pin Length of SIPs -- 0.239" [6.07mm]

The Texas Instruments MSP430 tools associated with this Adapter are:

MSP-FET430P120 FET

MSP-FET430P140 FET

MSP-FET430P410 FET

MSP-FET430P440 FET

MSP-PRGS430 Serial Programmer

All of the MSP430 Flash parts are supported by the 430-JTAG adapter.

A printable mounting and assembly tutorial in US Letter or A4 paper size format is available. You will need Acrobat Reader to read this.